DESCRIPTION

The Model HM-560 smoke detector is a low voltage, photoelectric unit designed for both single and multiple station use. The detector connects directly to any Sentry host panel. It's sensor operates on the scattered light principle, and electronically compensates for ambient light conditions. The detector has its own 85dB temporal pattern horn, power-on LED, and test switch. It is supplied with a plastic bracket that mounts easily to 3" or 4" octagon, 4" square or single gang boxes.

FEATURES

Photoelectric sensor is designed to sample the air every 3 seconds and trigger an alarm if prescribed levels of smoke appear. Powered directly from the host panel, will operate from system batteries when power goes out. Test switch checks all detector functions. Insect resistant screen minimizes nuisance alarms. Listed to UL 217 and meets FCC Standards for lightning protection. Special shielding increases RF immunity. Up to 9 additional detectors can be interconnected. The alarm is automatically reset when the smoke clears. The detectors alarm horn can be remotely activated by the host panel with the fire alarm interface option on the Master Console.