|
Description
Wall mount card cage for the Heritage MedCall "Clinicomm" processor
controlled system. Holds up to 7 cards, 1 - MPU-8 and 6 - I/O-16 cards, or 7 -
I/O-16 cards in multiple card cage systems. Provides up to 104 ports in a single
card cage system, or up to 112 ports when used in a multiple card cage system.
Minimum system requirements are: 1 - HM-CC Card cage, 1 - MPU-8 processor card,
1 - HM-5V-10A power supply, 1 - HM-24V-2.5A power supply and necessary
interconnection cables as required.
Connections
Contains 7 back-plane connectors for circuit cards and power connections for
5 Volt and 24 Volt power supplies (not included). Also has an external DB-25
connector for daisy-chaining multiple card cages together to increase system
capacity up to 912 ports.
Enclosure
Rugged sheet metal enclosure with nylon card guides. A sheet metal cover
holds all cards securely in place and prevents contaminants from entering the
enclosure.
|
Installation
Mount to a wall or back-board with the mounting brackets provided. Connectors
are provided for 5 Volt and 24 Volt power supplies. Cards are properly addressed
and fully seated into the appropriate slots in the card cage as noted by the
silkscreen on the enclosure top. In multiple card cage systems, other card cages
are interconnected using the DB-25 connector on the end of the enclosure.
Housing and Finish
Punched steel housing with protective steel cover. Entire enclosure is baked
epoxy finish in off white with black silkscreen designators.
Dimensions
14 1/8" (35.88cm) wide x 7 5/8" (19.37cm) high x 7 3/8"
(18.73cm) deep.
|
