|
Description
Mill finished steel back-box for
flush mounting Heritage MedCall A20 - A60 Annunciator Lamp Panels, and A20PB -
A60PB Push-button Panels.
Connections
Top, bottom and sides of the back-box
are predrilled for connection to 1" conduit fittings.
Enclosure
Rugged sheet metal back box for
secure flush mounting of Heritage annunciator / lamp panels.
|
Installation
Mount securely to a wall stud by
drilling appropriate holes for suitable fasteners. Mount horizontally or
vertically as determined by orientation of annunciator plate. Make sure when
mounting that consideration is given to the thickness of the wall material
being used for placement of the back box. Connect conduit to back box per
code. Make sure all burrs and sharp edges are removed. Use provided
speed-nut fasteners for mounting face panel.
Housing and Finish
Mill finished steel back box.
Dimensions
7 1/2" (19.1cm) wide x 10 1/8"
(25.7cm) high x 3" (7.6cm) deep.
|
